When you arrive at your home, our installers will begin by laying down plastic and fabric tarps in the areas where they will be working. The first step is to prepare the attic for the new insulation. This means that any old insulation must be removed, as well as any debris that is present. To ensure that contaminants in the attic don't spread to the rest of the house, the surfaces of the rooms around the entrance to the attic should be covered with thick plastic sheets.
Any items stored in the attic should be safely removed and stored elsewhere. Sealing and insulating your home can save you up to 10% on your annual energy bills, while also improving your home comfort in both winter and summer. The first step is to check the attic and confirm that it needs more insulation and, likely, some airtight sealing. Most people find that it is best to hire a trained insulation contractor to do the work for them.
All items stored in the attic must be removed, as insulation materials can damage them and your health if inhaled. The next step is to inspect the attic for air gaps and other issues that could reduce the effectiveness of the insulation. Blown insulation does a great job of getting into small cracks, but it won't fill every air gap. To ensure that the fan used to blow loose fill insulation into the attic works properly, common attic maintenance tasks should be completed beforehand. Skylights can be difficult to insulate, so it may be best to consult a professional if you have them installed. Once all old insulation has been removed and the attic floor has been cleaned, it's time to install new insulation.
This is usually done by placing roll or block insulation between ceiling beams or by using a fan to blow loose fill insulation between them. It may be necessary to make a small hole in the attic to insert the fan hose, or another route may be chosen for directing cellulose insulation into the house. Attic insulation provides an important thermal barrier against heat transfer, even though you may not enter it very often. It can be tempting to try and determine if you have an adequate level of insulation and if it's in good condition, but it's probably best to leave it in the hands of a contractor or installer. The contractor must provide documentation at the end of their work showing how much insulation has been added and what its new R-value is. You may have to pay an initial cost for installing attic insulation, but you will get a return on your investment in a few years due to energy savings on your bill.
The exact material selected for your residential attic insulation project depends on your current needs and how much insulation your home needs to stay comfortable in Cincinnati's climate. An experienced attic insulation installer in Cincinnati will add labor costs to your total price, but you'll end up with a professional installation that's done quickly, efficiently, and correctly. You'll also need a ventilation mask and other protective equipment if you plan on installing yourself, as well as any other tools needed for preparing the attic for insulation. Insulation bags have comprehensive information on how much insulation you need for your attic's square footage. Talk to your contractor company about their process of installing blown insulation and how long they expect it to take.
